For clean, safe cutting to length of NF metals, plastic and wood.
	Laterally moving saw head to minimize distance between vise holding the work piece and kerf. For cutting without vibration and chattering. The fence and 45° mitre capability ensure identical lengths for picture frames. Comfortable grip with built-in switch and saw head release button. Tungsten carbide blade for NF metals, wood and plastic. Direct drive via a toothed belt. Round table made of die-cast alu, rotates 45° left and right. Positive stops in 15° increments. Integrated clamping system with fixed jaws. V-slot for round work pieces. Front side slot allows thin pieces to be clamped. Cutting disc with reinforcement, 80 x 1.0 x 10 mm. Corundum compound, used on steel, NF metal, plastic and wood. NO 28 729 Tungsten tipped blade, 80 x 1.6 x 10 mm. 36 teeth. The high tooth count yields clean cuts when cutting a variety of materials, e.g. balsa, plywood, soft wood and PC cards. May also be used on hard wood, POLYCARBONATE, plastic and alu. Fits the table saw FKS/E as well. NO 28 732 This machine is ideal for mitre cuts: the round worktable with clamped work piece rotate, not the headstock! The laterally moving headstock (patent DP 103.18.479.1) eliminates any possibility of the blade and clamping system colliding. The minute spacing between the kerf and clamping system ensures cutting with a minimum of chatter and vibration. The fence and 45° mitre capability ensure identical lengths for picture frames. Powerful, quiet DC motor. Power transmission takes place via a toothed belt. The tungsten tipped blade (80 x 1.6 x 10 mm, 24 teeth) cuts NF metals, wood and plastic. Technical Data: 220 - 240 V. 200 W. 50/60 Hz. 4,000 rpm. Table size 230 x 230 mm. Weight approx. 6 kg. Consult the table for cutting capacities. NO 27 160 Cutting capacity at 90° (right angle cut): Material size (in mm) Max. material width (in mm) Round material (in mm) 10 18 21 25 65 50 40 25 Ø max. 25 Cutting capacity at 45° (mitre cut): Material size (in mm) Max. material width (in mm) Round material (in mm) 05 10 15 20 36 30 25 18 Ø max. 20